Morbern Allante White AL810

$18.95
In stock
SKU
6010
Leatherlike Feel, High Tailorability, Excellent Durability Characteristics. Price per yard.
Specifications
Finished Width: 54 inches
Roll Size: 40 yards
Weight: 29.25 +/- 1.5 oz per linear yard
Thickness: 45 +/- 4.5 mils
Abrasion resistance: No significant wear after 100,000 double rubs with #8 cotton duck using the Wyzenbeek test method
Cold Crack -25°
1000 Hours WeatherOmeter

Flame Resistance
FMVSS-302
CA TB 117-2013 (Section 1-Cover Fabric)
BIFMA Class A
NFPA 260A
UFAC Class 1
Ring 6010 Morbern Allante White

Leatherlike Feel, High Tailorability, Excellent Durability Characteristics, comes 54" width.
Specifications
Finished Width: 54 inches
Roll Size: 40 yards
Weight: 29.25 +/- 1.5 oz per linear yard
Thickness: 45 +/- 4.5 mils
Abrasion resistance: No significant wear after 100,000 double rubs with #8 cotton duck using the Wyzenbeek test method
Cold Crack -25°
1000 Hours WeatherOmeter

Flame Resistance
FMVSS-302
CA TB 117-2013 (Section 1-Cover Fabric)
BIFMA Class A
NFPA 260A
UFAC Class 1

Care & Cleaning
This product has been developed to emulate the look and feel of soft leather. The unique super dull finish is designed to be low burnishing, non-polishing and resistant to ultra violet exposure. Allante vinyls have superb tailoring qualities, which make
pre-heating and steaming unnecessary and not recommended in the fabrication process. Because of the special leather-like
finish, additional precautions should be observed when
processing and cleaning. Please avoid contact with marking inks, glues and other staining materials that may damage vinyl during the manufacturing process. Protecting seating with a clean
polyethylene cover, as is common in the automotive industry, should enable you to deliver a stain free unit to the customer.

If despite all precautions, staining material does come in contact with Allante vinyls, cleaning should be immediate and should follow these instructions:
• Dry soil, Dust and Dirt, Dried on Dirt: Remove with soft cloth
dampened with water.
• Variation in Surface Gloss: Wipe with a soft cloth dampened
with water. Allow to air dry.
• Stubborn Dirt: Wash with a soft cloth moistened with a mild soap
and water. Rinse with clean water.
• Stubborn Spots and Stains: Spray with either Formula 409®, or
Tannery Car Care Cleaner®, wiping with a soft cloth. Rinse with
clean water.
• Liquid Spills: Wipe immediately with a clean absorbent cloth.
Rinse with clean water.
• Food, Grease, and Oily Stains: Spray immediately using either
Formula 409®, or Tannery Car Care Cleaner®, wiping with a soft
cloth. Take care not to extend the area of contamination
beyond its original boundary. Rinse with clean water.

Allante Vinyls should be periodically cleaned to maintain their appearance and prevent build-up of dirt and contaminates. Any stain, spill or soiling should be cleaned up promptly to prevent the possibility of permanent staining. When cleaning, always rub gently.

Caution: Powdered abrasives, abrasive cleaners, and steel wool damage vinyl, as do strong solvents, lacquer solvents and inks. Lotions, suntan oil, waxes and polishes, etc., contain oils and dyes that can cause stiffening and staining of vinyls. Never use heat guns or hair dryers.

Note: Stronger cleaners, detergents, and
Copyright © 2019 Midwest Fabrics. All rights reserved.